CP-MP10 is organic modified bentonite clay. It can be used in low, medium and high polarity(ketones, ester, ether esters, alcohols, aromatic) systems.

Typical properties

Composition                      Organic derivative of a montmorillonite clay

Appearance                                   Fine powder, light yellow

Moisture content (105 Degree,2hr)               Max. 3.5%

Viscosity, mPa.s                                          3000-6000

Loss on ignition %(1000 Degree)                      32-35

Bulk density                                            0.46-0.48 g/cm3

Fineness (<74um, %)                                    Min. 98%

Application

Paint，such as epoxy paint, anticorrosion paint, wood paint

Ink

Cosmetics

Sealant

Using

It is used in intermediate and high systems can dispersed with high-speed shearing and not need polar activator. If add polar activator and have pre-gel procedure, better performance may be achieved.

The product applied in low system if add polar activator and pre-gel can achieve better performance.

Adding level is commonly 0.2%~2.0%.