CP-34 is an organo clay (modified bentonite), designed especially for use in solvent based system. It can be used widely in solvents from low polarity to medium-high polarity. http://www.modifiedbentonite.com   mailto:info@camp-shinning.com

Typical properties

Composition                      Organic derivative of a montmorillonite clay

Appearance                                        Fine white powder

Moisture content(105 Degree,2hr)               Max. 3.5%

Viscosity, mPa.s                                          3500-5500

Loss on ignition, %(1000 Degree)                   28.5-32

Bulk density                                                0.46-0.48

Fineness (200 mesh)                                    Min. 98%

Application

Marine paint, Industrial paint, heavy-duty, anticorrosion paint such as bituminous coatings, polyester paints, Alkyd paints.

Inks                                      

Grease

Sealant                                    

Unsaturated polyester putty

Using

CP-34 disperses under high shear and requires a polar activator for best efficiency. Heat is not required to obtain good dispersion. Addition levels are typically in 0.2%~2.0%. Polar activator (95% Ethanol or 95% Methanol) is needed. Normally addition level of polar activator is recommended to be 40%~50% of   CP-34 in weight. If in xylene system, addition level of polar activator is about 30%-40% of CP-34 in weight.